![background image](http://html1.mh-extra.com/html/smc-networks/6752al2-annexe-1/6752al2-annexe-1_management-manual_1300178084.webp)
C
ONFIGURING
THE
S
WITCH
3-36
Command Attributes
•
Remote Log Status
– Enables/disables the logging of debug or error
messages to the remote logging process. (Default: Enabled)
•
Logging Facility
– Sets the facility type for remote logging of syslog
messages. There are eight facility types specified by values of 16 to 23.
The facility type is used by the syslog server to dispatch log messages
to an appropriate service.
The attribute specifies the facility type tag sent in syslog messages. (See
RFC 3164.) This type has no effect on the kind of messages reported
by the switch. However, it may be used by the syslog server to process
messages, such as sorting or storing messages in the corresponding
database. (Range: 16-23, Default: 23)
•
Logging Trap
– Limits log messages that are sent to the remote syslog
server for all levels up to the specified level. For example, if level 3 is
specified, all messages from level 0 to level 3 will be sent to the remote
server. (Range: 0-7, Default: 6)
•
Host IP List
– Displays the list of remote server IP addresses that
receive the syslog messages. The maximum number of host IP
addresses allowed is five.
•
Host IP Address
– Specifies a new server IP address to add to the
Host IP List.
Summary of Contents for 6752AL2 - annexe 1
