![background image](http://html1.mh-extra.com/html/smc-networks/6752al2-annexe-1/6752al2-annexe-1_management-manual_1300178137.webp)
P
ORT
C
ONFIGURATION
3-89
•
Capabilities
– Specifies the capabilities to be advertised for a port
during auto-negotiation. (To access this item on the web, see
“Configuring Interface Connections” on page 3-48.) The following
capabilities are supported.
-
10half
- Supports 10 Mbps half-duplex operation
-
10full
- Supports 10 Mbps full-duplex operation
-
100half
- Supports 100 Mbps half-duplex operation
-
100full
- Supports 100 Mbps full-duplex operation
-
1000full
- Supports 1000 Mbps full-duplex operation
-
Sym
- Transmits and receives pause frames for flow control
-
FC
- Supports flow control
•
Broadcast storm
– Shows if broadcast storm control is enabled or
disabled.
•
Broadcast storm limit
– Shows the broadcast storm threshold.
(64-95232000 octets per second)
•
Flow control
– Shows if flow control is enabled or disabled.
•
LACP
– Shows if LACP is enabled or disabled.
•
Port Security
– Shows if port security is enabled or disabled.
•
Max MAC count
– Shows the maximum number of MAC address
that can be learned by a port. (0 - 1024 addresses)
•
Port security action
– Shows the response to take when a security
violation is detected. (shutdown, trap, trap-and-shutdown, or none)
Current Status:
•
Link Status
– Indicates if the link is up or down.
•
Port Operation Status
– Provides detailed information on port state.
(Displayed only when the link is up.)
•
Operation speed-duplex
– Shows the current speed and duplex
mode.
•
Flow control type
– Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or none)
Summary of Contents for 6752AL2 - annexe 1
