3-13
Using the Command Line Interface (CLI)
Using the CLI
U
sin
g
th
e
Co
m
m
a
n
d
L
in
e
In
te
rf
ac
e (
C
LI
)
Figure 3-10. Context-Specific Commands Affecting Port Context
SMC6624M(eth-5-8)# ?
SMC6624M(eth-5-8)# ?
Lists the commands you can
use in the port or static trunk
context, plus the Manager,
Operator, and context
commands you can execute
at this level.
SMC6624M(eth-5-8)# ?
flow-control
Enable/disable flow control on the port
speed-duplex
Define mode of operation for the port
broadcast-limit
Set a broadcast traffic percentage limit
unknown-vlans
Define what the port will do when it encounters GVRP
packet requesting it to join a VLAN
enable
Enable port
disable
Disable port
lacp
Define whether LACP is enabled on the port, and whether
it is in active or passive mode when enabled
monitor
Define that the port is to be monitored
interface
Enter the Interface Configuration Level, or execute one
command on that level
vlan
Add, delete, edit VLAN configuration or enter a VLAN
context
boot
Reboot the device
configure
Enter the Configuration context
copy
Copy datafiles to/from the switch
end
Return to the Manager Exec context
erase
Erase configuration file stored in flash
-- MORE --
The remaining commands in the listing are
Manager, Operator, and context commands.
In the port context, the first block of commands in the "?"
listing show the context-specific commands that will affect
only ports 5-8.
