SMC Networks 6624FMST Management Manual Download Page 271

Page: 271 / 388

9-81

Configuring Advanced Features

GVRP

ring Adva

nc
ed

Featu

res

2. Switch Configuration . . .

8. VLAN Menu . . .

1. VLAN Support

Figure 9-60. The VLAN Support Screen (Default Configuration)

Do the following to enable GVRP and display the Unknown VLAN fields:

Press [E] (for

Edit

Use

[v]

to move the cursor to the

GVRP Enabled

field.

Press the Space bar to select

Yes

Press

[v]

again to display the

Unknown VLAN

fields.

Figure 9-61. Example Showing Default Settings for Handling Advertisements

Use the arrow keys to select the port you want, and the Space bar to select
Unknown VLAN option for any ports you want to change.

When you finish making configuration changes, press [Return], then [S]
(for

Save

) to save your changes to the Startup-Config file.

The Unknown VLAN
fields enable you to
configure each port to:

– Learn - Dynamically

join any advertised
VLAN and forward all
advertisements the
port receives.

– Block - Do not

dynamically join any
VLAN, but still
forward
advertisements.

– Disable - Ignore and

drop all
advertisements.

Summary of Contents for 6624FMST





































































































































































































































































































































































































Search results

Summary of Contents for 6624FMST

Reviews:

Brands by name

Popular brands

SMC Networks 6624FMST, Management Manual

Search results

Summary of Contents for 6624FMST

Reviews:

Brands by name

Popular brands