![background image](http://html.mh-extra.com/html/smc-networks/6624fmst/6624fmst_management-manual_1300650188.webp)
8-10
Configuring for Network Management Applications
Trap Receivers and Authentication Traps
Mo
ni
to
ri
ng
a
nd
Ma
na
gi
ng
the S
w
it
c
h
CLI: Configuring and Displaying Trap Receivers
Trap Receiver Commands Used in This Section
Using the CLI To List Current SNMP Trap Receivers
This command lists the currently configured trap receivers and the setting for
authentication traps (along with the current SNMP community name data —
see “SNMP Communities” on page 8-5).
Syntax
:
show snmp-server
In the next example, the
show snmp-server
command shows that the switch
has been previously configured to send SNMP traps to management stations
belonging to the “public,” “red-team,” and “blue-team” communities.
Figure 8-4. Example of Show SNMP-Server Listing
show snmp-server
below
snmp-server host
<ip-addr> <community-name>
[none | all | non-info| critical | debug]
page 8-11
snmp-server enable traps authentication
page 8-11
SMC6624M(config)# show snmp-server
SNMP Communities
Community Name
MIB View Write Access
---------------- -------- ------------
public
Operator Restricted
blue-team
Manager
Unrestricted
red-team
Manager
Unrestricted
Trap Receivers
Send Authentication Traps : No
Address
Community
Events Sent in Trap
---------------------- ---------------- -------------------
13.28.227.200
public
All
13.28.227.105
red-team
Critical
13.28.227.120
blue-team
Not-INFO
Example of
Community
Name Data (See
page 8-5.)
Example of Trap
Receiver Data
Authentication
Trap Setting