![background image](http://html.mh-extra.com/html/smc-networks/6624fmst/6624fmst_management-manual_1300650289.webp)
9-99
Configuring Advanced Features
Multimedia Traffic Control with IP Multicast (IGMP)
C
o
nf
ig
u
ring Adva
nc
ed
Featu
res
Configuring IGMP Traffic Priority.
This command assigns “high” priority
to IGMP traffic or returns a high-priority setting to “normal” priority.
Syntax:
vlan
<vid>
ip igmp high-priority-forward
Default:
normal
SMC6624M(config)# vlan 1 ip igmp
high-priority-forward
Configures high priority for IGMP traffic on VLAN 1.
SMC6624M(vlan-1)# vlan 1 ip igmp high-priority-forward
Same as above command, but in the VLAN 1 context level.
SMC6624M(vlan 1)# no ip igmp
high-priority-forward
Returns IGMP traffic to “normal” priority.
SMC6624M> show ip igmp config
Show command to display results of above high-priority commands.
Configuring the Querier Function.
The function of the IGMP Querier is
to poll other IGMP-enabled devices in an IGMP-enabled VLAN to elicit group
membership information. The switch performs this function if there is no
other device in the VLAN, such as a multicast router, to act as Querier.
Although the switch automatically ceases Querier operation in an IGMP-
enabled VLAN if it detects another Querier on the VLAN, you can also use a
CLI command to disable the Querier function for that VLAN.
The default querier function is “enabled”. This command disables or re-
enables the querier function.
Syntax:
[no] vlan
<vid>
ip igmp querier
Default:
Yes
For example, to disable the Querier function on VLAN 1 in an SMC6624M
switch:
SMC6624M(config)# no vlan 1 ip igmp querier
Disables the querier function on VLAN 1.
SMC6624M(vlan-1)# no ip igmp querier
Disables Querier function on VLAN 1 from within the VLAN 1
context.