![background image](http://html.mh-extra.com/html/smc-networks/6624fmst/6624fmst_management-manual_1300650209.webp)
9-19
Configuring Advanced Features
Stack Management
C
o
nf
ig
u
ring Adva
nc
ed
Featu
res
Figure 9-11. Example of Stack Management Screen After New Member Added
Using the Commander’s Menu To Move a Member From One Stack to
Another.
Where two or more stacks exist in the same subnet (broadcast
domain), you can easily move a Member of one stack to another stack if the
destination stack is not full. (If you are using VLANs in your stack environ-
ment, see “Stacking Operation with a Tagged VLAN” on page 9-44.) This
procedure is nearly identical to manually adding a Candidate to a stack (page
9-17). (If the stack from which you want to move the Member has a Manager
password, you will need to know the password to make the move.)
1.
To move a Member from one stack to another, go to the Main Menu of
the Commander in the destination stack and display the Stacking Menu
by selecting
9. Stacking...
2.
To learn or verify the MAC address of the Member you want to move,
display a listing of all Commanders, Members, and Candidates in the
subnet by selecting:
2. Stacking Status (All)
You will then see the Stacking Status (All) screen:
New Member added in
For status descriptions,
see the table on page
9-46.