IP Interface Commands
4-315
4
ip default-gateway
This command establishes a static route between this switch and devices that exist
on another network segment. Use the
no
form to remove the static route.
Syntax
ip default-gateway
gateway
no ip default-gateway
gateway
- IP address of the default gateway
Default Setting
No static route is established.
Command Mode
Global Configuration
Command Usage
A gateway must be defined if the management station is located in a different
IP segment.
Example
The following example defines a default gateway for this device:
Related Commands
show ip redirects (4-316)
ip dhcp restart
This command submits a BOOTP or DHCP client request.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• This command issues a BOOTP or DHCP client request for any IP interface
that has been set to BOOTP or DHCP mode via the
ip address
command.
• DHCP requires the server to reassign the client’s last address if available.
• If the BOOTP or DHCP server has been moved to a different domain, the
network portion of the address provided to the client will be based on this new
domain.
Console(config)#ip default-gateway 10.1.1.254
Console(config)#
Summary of Contents for 6128PL2
