Command Line Interface
4-258
4
lldp dot1-tlv pvid
This command configures an LLDP-enabled port to advertise its default VLAN ID.
Use the
no
form to disable this feature.
Syntax
[
no
]
lldp dot1-tlv pvid
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The port’s default VLAN identifier (PVID) indicates the VLAN with which
untagged or priority-tagged frames are associated (see “switchport native vlan”
on page 4-229).
Example
lldp dot1-tlv vlan-name
This command configures an LLDP-enabled port to advertise its VLAN name. Use
the
no
form to disable this feature.
Syntax
[
no
]
lldp
dot1-tlv vlan-name
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises the name of all VLANs to which this interface has been
assigned. See “switchport allowed vlan” on page 4-230 and “protocol-vlan
protocol-group (Configuring VLANs)” on page 4-244.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv pvid
Console(config-if)#
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv vlan-name
Console(config-if)#
Summary of Contents for 6128PL2
