SMC Networks 6128PL2, Management Manual

Page: 410 / 664

Command Line Interface
4-102
4
Example
server
This command adds a security server to an AAA server group. Use the no form to
remove the associated server from the group.
Syntax
[ no ] server { index | ip-address }
• index - Specifies the server index. (Range: RADIUS 1-5, 1)
• ip-address - Specifies the host IP address of a server.
Default Setting
None
Command Mode
Server Group Configuration
Command Usage
• When specifying the index for a RADIUS server, that server index must
already be defined by the radius-server host command (see page 4-94).
• When specifying the index for a server, that server index must
already be defined by the tacacs-server host command (see page 4-98).
Example
aaa accounting dot1x
This command enables the accounting of requested 802.1X services for network
access. Use the
no form to disable the accounting service.
Syntax
aaa accounting dot1x { default | method-name } start-stop group { radius |
| server-group }
no aaa accounting dot1x { default | method-name }
• default - Specifies the default accounting method for service requests.
• method-name - Specifies an accounting method for service requests.
(Range: 1-255 characters)
• start-stop - Records accounting from starting point and stopping point.
• group - Specifies the server group to use.
- radius - Specifies all RADIUS hosts configure with the radius-server
host command described on page 4-94.
Console(config)#aaa group server radius tps
Console(config-sg-radius)#
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#