Multicast VLAN Registration Commands
4-311
4
Example
The following configures one source port and several receiver ports on the switch,
enables immediate leave on one of the receiver ports, and statically assigns a
multicast group to another receiver port:
show mvr
This command shows information about the global MVR configuration settings when
entered without any keywords, the interfaces attached to the MVR VLAN using the
interface
keyword, or the multicast groups assigned to the MVR VLAN using the
members
keyword.
Syntax
show mvr
[
interface
[
interface
]
|
members
[
ip-address
]]
•
interface
•
ethernet
unit
/
port
-
unit
- Stack unit. (Range: 1)
-
port
- Port number. (Range: 1-28)
•
port-channel
channel-id
(Range: 1-8)
•
ip-address
- IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
Default Setting
Displays global configuration settings for MVR when no keywords are used.
Command Mode
Privileged Exec
Command Usage
Enter this command without any keywords to display the global settings for
MVR. Use the
interface
keyword to display information about interfaces
attached to the MVR VLAN. Or use the
members
keyword to display
information about multicast groups assigned to the MVR VLAN.
Console(config)#interface ethernet 1/5
Console(config-if)#mvr type source
Console(config-if)#exit
Console(config)#interface ethernet 1/6
Console(config-if)#mvr type receiver
Console(config-if)#mvr immediate
Console(config-if)#exit
Console(config)#interface ethernet 1/7
Console(config-if)#mvr type receiver
Console(config-if)#mvr group 225.0.0.5
Console(config-if)#
Summary of Contents for 6128PL2
