AAA Authorization and Accounting
3-69
3
Authorization Settings
AAA authorization is a feature that verifies a user has access to specific services.
Command Attributes
•
Method Name
– Specifies an authorization method for service requests.
The “default” method is used for a requested service if no other methods have been
defined. (Range: 1-255 characters)
•
Service Request
– Specifies the service as Exec (authorization for local console
or Telnet connections).
•
Group Name
- Specifes the authorization server group. (Range: 1-255 characters)
The group name “” specifies all configured hosts (see
“Configuring Local/Remote Logon Authentication” on page 3-54). Any other group
name refers to a server group configured on the Group Settings page.
Authorization is only supported for servers.
Web
– Click Security, AAA, Authorization, Settings. To configure a new authorization
method, specify a method name and a group name, select the service, then click
Add.
Figure 3-43 AAA Authorization Settings
CLI
– Specify the authorization method required and the server group.
Console#show accounting statistics
Total entries: 3
Acconting type : dot1x
Username : testpc
Interface : eth 1/1
Time elapsed since connected: 00:24:44
Acconting type : exec
Username : admin
Interface : vty 0
Time elapsed since connected: 00:25:09
Console#
Console(config)#aaa authorization exec default group
4-107
Console(config)#
Summary of Contents for 6128PL2
