AAA Authorization and Accounting
3-73
3
When you have obtained these, place them on your TFTP server and transfer them
to the switch to replace the default (unrecognized) certificate with an authorized one.
Command Attributes
•
TFTP Server IP Address
– Specifies the IP address of the TFTP server which
contains the certificate file.
•
Source Certificate File Name
– Specifies the name of certificate file as stored on
the TFTP server.
•
Source Private File Name
– Specifies the name of the private key file as stored
on the TFTP server.
•
Private Password
– The password for the private key file.
Web
– Click Security, HTTPS Settings. Fill in the TFTP server, certificate and private
file name details, then click Copy Certificate.
Figure 3-47 HTTPS Settings
CLI
– This example copies the certificate file from the designated TFTP server.
Note:
The switch must be reset for the new certificate to be activated. To reset the
switch, See “Resetting the System” on page 3-34 or type:
Console#reload
Console#copy tftp https-certificate
4-84
TFTP server ip address: <
server ip-address
>
Source certificate file name: <
certificate file name
>
Source private file name: <
private key file name
>
Private password: <
password for private key
>
Summary of Contents for 6128PL2
