Multicast Filtering
3-231
3
•
New Multicast Address Range List
– Specifies multicast groups to include in the
profile. Specify a multicast group range by entering the same IP address for the
start and end of the range. Click the Add button to add a range to the current list.
•
Current Multicast Address Range List
– Lists multicast groups currently
included in the profile. Select an entry and click the Remove button to delete it from
the list.
Web
– Click IGMP Snooping, IGMP Filter Profile Configuration. Select the profile
number you want to configure; then click Query to display the current settings.
Specify the access mode for the profile and then add multicast groups to the profile
list. Click Apply.
Figure 3-141 IGMP Profile Configuration
CLI
– This example configures profile number 19 by setting the access mode to
“permit” and then specifying a range of multicast groups that a user can join. The
current profile configuration is then displayed.
Console(config)#ip igmp profile 19
4-302
Console(config-igmp-profile)#permit
4-303
Console(config-igmp-profile)#range 239.1.2.3
4-303
Console(config-igmp-profile)#range 239.2.3.1 239.2.3.200
Console(config-igmp-profile)#end
Console#show ip igmp profile 19
4-307
IGMP Profile 19
permit
range 239.1.2.3 239.1.2.3
range 239.2.3.1 239.2.3.200
Console#
Summary of Contents for 6128PL2
