16
Place the remote receiver inside your house, but close to the pool side
alarm unit and at a straight line of sight. DO NOT place the unit near
large metal objects or large motors, such as a refrigerator, or washing
machine. This will adversely affect the RF reception.
Plug in the A/C adapter and the yellow LED on the left flashes,
indicating it is ready to receive signals.
Hit the RESET button located between the two LEDs to reset the receiver.
Each reset will disable the receiver for 10 seconds, allowing you enough
time to go to the pool side alarm transmitter to reset it or turn it off.
During this 10 second timeframe, the yellow LED on the left will flash
quickly. If you do not reset the receiver, it will reset automatically in four
minutes.
REMOTE RECEIVER
The receiver gives 4 different LED indications:
1. Yellow LED flashes once per second: This happens when the A/C
Adapter is first plugged in. It may also indicate the poolside alarm is
turned OFF.
2. Green LED stays on: This indicates the alarm outside is turned ON.
3. Green and Yellow flashes alternatively at 1 second cycle: This
indicates batteries of the alarm outside are running low. Change the
batteries with new ones and reset this receiver. It may also indicate
the receiver has received a signal from the PIR sensor.
4. Green and Yellow flashes quickly: This indicates the receiver had
received an alarm signal from the water motion sensor.
LED INDICATION
