7
Place the unit such that the wide side of the moving sensor is parallel to
the side of the swimming pool wall.
Check the sensor in the water. The sensor is buoyant and should stay
upright. If the sensor lies on its side, please contact SMARTPOOL
immediately. The sensor must remain in an upright position while it is in
the water.
If you have to place the unit near the return, heavy water current may
set off the alarm. If this happens, put the deflector cap onto the sensor
cage as shown. Place the cap against the water current. Please note
that the sensor cage with a deflector cap will reduce the sensitivity of
the unit. Check the unit function according to the description in the
Sensitivity Adjustment before use.
NOTE: The deflector will reduce sensitivity. Test the alarm unit as
described in the Sensitivity Adjustment section and test again as
described in Alarm Unit Function Test section.
