6
2. DECK MOUNTING
A powder coated stainless steel bracket and two sets of U shaped
plastic clamps are used to mount the unit along the deck of in-ground
pools. The metal bracket can either be bolted onto the deck by two
stainless steel screws, or attached with 4 sets of 3M Dual Lock pads. If
your pool has a concrete deck, we suggest you coat the deck with
water-proof paint in the area you will be placing the pads. The water-
proof paint will prevent calcium migration that will attack the adhesive.
Ensure the area is dry and clean before you mount the pads.
Press the bracket down firmly. The adhesive will develop a strong bond
under pressure. If the deck has a sloped edge, attach the two square
plastic pieces to the end of metal bracket to make it level. It is important
to make the bracket level so that the sensor tube can be held vertically.
Clamp the unit onto this metal bracket by the 2 sets of U shaped platic
clamps. Tighten the screws, but do not strip the threads.
