HGM8151 Genset Parallel Controller User Manual Page 8 of 66
─
All output ports are relay output.
─
Parameter setting: parameters can be modified and stored in internal FLASH memory and cannot
be lost even in case of power outage; most of them can be adjusted using front panel of the
controller and all of them can be modified using PC via USB, RS485 or ETHERNET ports.
─
Sensor curves are user-defined and multiple sensor curves (temperature, pressure and oil pressure)
can be used directly.
─
Multiple crank disconnect conditions (rotate speed, oil pressure, generator frequency) are optional.
─
Widely power supply range DC(8~35)V, suitable to different starting battery voltage environment.
─
Event log, real-time clock, scheduled start & stop generator (can be set as start genset once a
day/week/month whether with load or not).
─
Can be used as indicator (only indicate and alarm, relay without action).
─
With maintenance function. Actions (warning, trip and stop, shutdown) can be set when
maintenance time out.
─
All parameters used digital adjustment, instead of conventional analog modulation with normal
potentiometer, more reliability and stability.
─
IP55 waterproofness level can be achieved with the help of rubber-ring gasket between shell and
control panel.
─
Metal fixing clips enable perfect in high temperature environment.
─
Modular design, self-extinguishing ABS plastic shell, pluggable terminal, built-in mounting
,
compact
structure with easy installation.
─
Accumulative total run time and total electric energy of A and B. Users can reset it as 0 and
re-accumulative the value which make convenience to users to count the total value as their wish.