SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
75
Policy routing makes somewhat automated routing choices based on policies defined by a network administrator. For example, a net-
work administrator might want to deviate from standard routing based on destination markers in the packet and, instead, forward a
packet based on the source address.
On this page, you can configure similar policies.
1. In the left navigation bar, click
Advanced Setup
>
Routing
>
Policy Routing
and then click
Add
. The following page appears.
2. Fill in the fields, using the information in the table below.
3. Click
Apply/Save
to commit your changes.
The fields on this page are explained in the following table.
Field Name
Description
Policy Name
Enter a descriptive name for this entry to the policy routing table. This is a free-form text field.
Physical LAN Port
Select a physical LAN interface for the policy route.
Source IP
Enter the IP address for the source of this policy route.
Use Interface
Select the WAN Interface for this policy route
Default Gateway IP Enter the IP address of the default gateway.
RIP (Routing Information Protocol)
