SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
69
Field Name
Description
Rule Status
Select whether this rule is active or inactive. Options are:
Enable
and
Disable
.
Specify Classification Criteria
section
Class Interface
(
Not applicable for SR515ac models
) Select an interface. Options are:
local
,
eth0
-
eth4
, and
wl0
.
Ingress Interface
(
Available for SR515ac models only
) Select an interface. Options are
LAN
,
WAN
and any interface already configured for your gateway.
Ether Type
Select the Ethernet interface type for this classification. Options include:
IP
,
ARP
,
and
IPV6
for most models, and additional options for the SR515ac model.
Source MAC Address
Source MAC Mask
Enter the source MAC Address and Source MAC Mask for this classification.
Destination MAC
Address
Destination MAC Mask
Enter the destination MAC Address and destination MAC Mask for this clas-
sification.
Source IP Address/Mask Enter the source IP Address and Source IP Mask for this classification.
Protocol
(
Optional
) Enter the Protocol specified for this classification.
UDP/TCP Source Port
(
Optional
) Enter the Source Port applicable for this classification. You can enter a
range (port:port) or a single port.
UDP/TCP Destination
Port
(
Optional
) Enter the destination port applicable for this classification. You can
enter a range (port:port) or a single port.
Specify Class Queue
(
Not applicable for SR515ac models
) Select from the available queues.
Note:
Make sure to select a queue that is configured for the interface that you
selected. If you select a queue that is not configured for the selected interface, any
packets classified into that queue are processed by the default queue for the inter-
face.
Specify Classification Results
section (
Available for SR515ac models only
)
Egress Interface
(
Available for SR515ac models only
) Select the egress interface for this rule.
Options are the interfaces already configured.
Egress Queue
Available for SR515ac models only
) Select the egress queue for this rule. Options
are the queues already configured.
Mark Applied Dif-
ferentiated Service Code
Select the desired DSCP code.
