SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
108
Note:
This option is not available on SR515ac models.
1. On the Wireless > Security page, select
WPA2-PSK
in the
Network Authentication
field. The following fields appear.
2. Fill in the fields, using the information in the field description table below.
3. Click
Apply/Save
to save the settings.
The fields on this page are explained in the following table.
Field Name
Description
Select SSID
Select the SSID of the wireless network to which this security configuration will apply.
WPA/WAPI passphrase
Enter the security password to be used by this security configuration.
Use base MAC address as
WAP/WAPI Passphrase
Select whether to allow the base MAC address to be substituted for the password (in lieu of manually
entering a password). When this box is checked, the
WPA/WAPI passphrase
field is ignored.
WPA Group Rekey Interval The frequency at which the gateway automatically updates the group key and sends it to connected LAN
client devices. Options are:
1
-
65535
seconds.
WPA/WAPI Encryption
Select the encryption standard. This field displays the option most compatible with the selected network
authentication method. Options are:
l
AES
: Advanced Encryption Standard.
l
TKIP+AES
: AES combined with TKIP (Temporary Key Integrity Protocol).
WEP Encryption
Select to enable Wired Equivalent Privacy (WEP) mode. Options are
Enabled
and
Disabled
.
Encryption Strength
(
Appears when
WEP Encryption
is set to
Enabled
) Select the length of the encryption method. Options are
128-bit
and
64-bit
. 128-bit is the more robust option for security.
