SMART ADSL 3xx series User Manual Download Page 15

Page: 15 / 152

Statistics

The Statistic pages provide network interface information for LAN, WAN Service, xTM and xDSL. All data is updated in 15-minute inter-
vals.

Notes:

For SR512nm models, statistics are also provided for MoCA connections.

For SR515ac models, statistics are also provided for the 2.4 Ghz and 5 Ghz wireless connections.

LAN

On this page, you can view the received and transmitted bytes, packets, errors and drops for each LAN interface configured on your gate-
way. All local LAN Ethernet ports, Ethernet WAN ports and w10 (Wireless Interface) are included.

In the left navigation bar, click

Device Info

Statistics

. The Statistics - LAN page appears where you can view detailed information

about the status of your LAN.

To reset the counters, click

Reset Statistics

near the bottom of the page.

Note:

Only the SR360n and SR5xx models support the SmartPort feature where a LAN port can be re-purposed to function as a WAN

port (as shown in the

Interface

column).

The fields on this page are explained in the following table.

Summary of Contents for ADSL 3xx series
























































































































































Search results

Summary of Contents for ADSL 3xx series

Reviews:

Related manuals for ADSL 3xx series

Brands by name

Popular brands

SMART ADSL 3xx series, User Manual

Search results

Summary of Contents for ADSL 3xx series

Reviews:

Related manuals for ADSL 3xx series

Brands by name

Popular brands