SMART ADSL 3xx series User Manual Download Page 143

Page: 143 / 152

142

1. In the left navigation bar, click

Management

Access Control

Passwords

. The following page appears.

2. Enter the information for the logged-in account.
3. Click

Apply/Save

to commit your settings.

The fields on this page are explained in the following table.

Field Name

Description

User Name

Specifies name of account to be configured. Options are

admin

support

user

Old Password

Enter the current password for the entered User Name.

New Password

Enter the new password for the entered User Name. A maximum of 16 characters is allowed.

Confirm Password Re-enter the new password.

Access List

On this page, you can create and manage access control lists to control inbound access to specific IP addresses.

Note:

This feature is available only for SR515ac models.

1. In the left navigation bar, click

Management

Access Control

Access List

. The following page appears showing any

addresses already configured for managed access.

Summary of Contents for ADSL 3xx series
























































































































































Search results

Summary of Contents for ADSL 3xx series

Reviews:

Related manuals for ADSL 3xx series

Brands by name

Popular brands

SMART ADSL 3xx series, User Manual

Search results

Summary of Contents for ADSL 3xx series

Reviews:

Related manuals for ADSL 3xx series

Brands by name

Popular brands