SMART Embedded Computing COMX-P2020 BSP, Installation And Use Manual

Page: 12 / 92

12 COMX-P2020 Module Installation and Use (6806800K97F)
About this Manual
About this Manual
Conventions
The following table describes the conventions used throughout this manual..
EEPROM Electrically Erasable Programmable Read- Only Memory
FCC Federal Communications Commission
I2C Inter IC
JTAG Joint Test Access Group
PCI-X Peripheral Component Interconnect -X
PIC Programmable Interrupt Controller
PLL Phase-Locked Loop
RGMII Reduced Gigabit Media Independent Interface
RTC Real-Time Clock
RTM Rear Transition Module
SATA Serial AT Attachment
SDRAM Synchronous Dynamic Random Access Memory
SMT Surface Mount Technology
SO-UDIMM Small-Outline and Unbuffered Dual In-line Memory Module
Abbreviation Definition
Notation Description
0x00000000
Typical notation for hexadecimal numbers (digits are 0 through F), for
example used for addresses and offsets
0b0000
Same for binary numbers (digits are 0 and 1)
bold Used to emphasize a word
Screen
Used for on-screen output and code related elements or commands.
Sample of Programming used in a table (9pt)
C Bold
Used to characterize user input and to separate it from system output
Reference
Used for references and for table and figure descriptions
File > Exit Notation for selecting a submenu
<text> Notation for variables and keys
[text]
Notation for software buttons to click on the screen and parameter
description