SMART Embedded Computing COMX-P2020 BSP, Installation And Use Manual

Page: 30 / 92

30 COMX-P2020 Module Installation and Use (6806800K97F)
Hardware Preparation and Installation
Hardware Preparation and Installation
2.1.2 Thermal Requirements
Contact your SMART EC sales representative for current information on the detailed
thermal information including airflow and resistance of the module.
2.1.3 Power Requirements
The default power input setting for the COMX-P2020 Module is 12V (11.4 - 12.6).
Table 2-2 Critical Temperature Spots for COMX-P2020 Module
Component Identifier
Heat Dissipation
Power (W) Maximum Allowable
Temperature (°C)
CPU-P2020 6.9 Tjmax = 125
GPU-XGI-Z11M 3.093 Tcmax = 110
NOTICE
System Overheating
Cooling Vents
Improper cooling can lead to system damage and can void the manufacturer's
warranty.
To ensure proper cooling and undisturbed airflow through the system do not
obstruct the ventilation openings of the system. Make sure that the fresh air supply
is not mixed with hot exhaust from other devices.
Personal Injury
During operation, hot surfaces may be present on the heat sinks and the
components of the product.
To prevent injury from hot surface do not touch any of the exposed components or
heatsinks on the product when handing. Use the handle and face plate, where
applicable, or the board edge when removing the product from the enclosure.
Table 2-3 Module Total Power Consumption
Voltage +12V POWER
Power consumption 12W (when idle in Linux)