SMART Board 6065 HD, Installation And Maintenance Manual

Page: 68 / 70

APPENDIX B
REMOTELY MANAGING THE DISPLAY
60 smarttech.com/kb/171204
Command Possible values Response Standby
mode
set powersave [Value] =on
=off
powersave= [Value] No
set fbc [Value] =on
=off
fbc= [Value] No
set waketotouch [Value] =on
=off
waketotouch= [Value] No
Resolving issues with remote management
The following table presents common issues with remote management and explains how to
resolve them:
Issue Solutions
You’re experiencing general issues
with remote management.
l
Make sure all the cable connections are secure.
l
Be aware that some commands work only when the display is on.
l
Configure the serial interface settings.
See Configuring the computer’s serial interface settings on page 52.
You’re experiencing other issues
with remote management, or the
previous solutions don’t resolve the
issue. See Referring to the SMART knowledge base for additional troubleshooting
information on page 45.