SMART Board 6065 HD, Installation And Maintenance Manual

Page: 29 / 70

Chapter 3
21 smarttech.com/kb/171204
Chapter 3: Connecting power and devices
Connecting power 21
Connecting cables for room computers, guest laptops and other input sources 22
Using recommend cables 22
Connecting to the display 23
Viewing a connected computer or other device’s input 23
Connecting external speakers 23
Connecting room control systems 24
Connector reference 25
Connect the display to power after you install it but before you turn it on for the first time. You can
also connect cables for room computers, guest laptops or other input sources as well as for
speakers and room control systems.
By installing cables in advance, you make use of connectors that might not be accessible after the
display is wall-mounted. You can then run the cables across floors or behind walls as needed.
WARNING
Ensure that any cables that cross the floor to the display are properly bundled and marked to
avoid a trip hazard.
Connecting power
Connect the supplied power cable from the AC power
inlet on the bottom of the display to a power outlet.