SMART Board 6065 HD, Installation And Maintenance Manual

Page: 62 / 70

APPENDIX B
REMOTELY MANAGING THE DISPLAY
54 smarttech.com/kb/171204
To identify the current value of a setting
Use the get command.
This example shows how to get the contrast level:
>get contrast
contrast=55
To assign a value to a setting
Use the set command.
This example sets the contrast level to 65:
>set contrast=65
contrast=65
To increase or decrease the value of a setting
Use the set command to increase or decrease the value by a designated number.
This example increases the contrast level by 5:
>set co5
contrast=70
This example decreases the contrast level by 15:
>set contrast -15
contrast=55
Command inventory