SMART Board 6065 HD, Installation And Maintenance Manual

Page: 3 / 70

i smarttech.com/kb/171204
Important information
WARNING
l
Failure to follow the installation instructions shipped with the display could result in injury
and product damage which may not be covered by the warranty.
l
Do not open or disassemble the display. You risk electrical shock from the high voltage
inside the casing. Opening the casing also voids the warranty.
l
Do not stand (or allow children to stand) on a chair to touch the surface of the display. Rather,
mount the product at the appropriate height.
l
To reduce the risk of fire or electric shock, do not expose the display to rain or moisture.
l
If the display requires replacement parts, make sure the service technician uses
replacement parts specified by SMART Technologies or parts with the same characteristics
as the original.
l
Ensure that any cables that cross the floor to the display are properly bundled and marked
to avoid a trip hazard.
l
Do not insert objects inside the cabinet ventilation holes, because they could touch
dangerous voltage points and cause electric shock, fire or product damage which may not
be covered by the warranty.
l
Do not place heavy objects on the power cable. Damage to the cable could cause shock,
fire or product damage which may not be covered by the warranty.
l
Use only extension cords and outlets that can fully accommodate the display’s polarized
plug.
l
Use the power cable provided with the display. If a power cable is not supplied, contact
your supplier. Use only power cables that match the AC voltage of the power outlet and that
comply with your country’s safety standards.
l
If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass
fragments with care when disposing of them.
l
Do not move or mount the display by connecting rope or wire to its handles. The display is
heavy, and failure of the rope, wire or handle could lead to injury.
l
Use only VESA®-approved mounts.