SMAR HI302, User Manual

Page: 85 / 92

Appendix C
C.7
HVT ALLOCATION MAP FOR SMAR LD301 V6.01
Index Parameter Name HART Variable Name HART Command Description
12.18 U8B_ARRAY_2[18] MEASURED_POINT_UNIT 162 r Measured Point Unit
12.19 U8B_ARRAY_2[19] CHAR_AND_DISPLAY_MODE 163 w Characterization Trim mode and Display
12.20 U8B_ARRAY_2[20] LOAD_RESTORE_TRIM 163 w Load/Restore Trim
13.1
U8B_ARRAY_3[1] FIRST_DISPLAY_CODE 164,165 w/r First Display
13.2
U8B_ARRAY_3[2] SECOND_DISPLAY_CODE 164,165 w/r Second Display
13.3 U8B_ARRAY_3[3] ZERO_SPAN_CHANGE_COUNT 166 r Number of times the Zero Span was done
13.4 U8B_ARRAY_3[4] FUNCTION_CHANGE_COUNT 166 r Number of times the Function was done
13.5 U8B_ARRAY_3[5] TRIM_4MA_CHANGE_COUNT 166 r Number of times the 4 mA trim was done
13.6 U8B_ARRAY_3[6] TRIM_20MA_CHANGE_COUNT 166 r Number of times the 20 mA trim was done
13.7 U8B_ARRAY_3[7] LOWER_TRIM_CHANGE_COUNT 166 r Number of times the Lower Trim was done
13.8
U8B_ARRAY_3[8] UPPER_TRIM_CHANGE_COUNT 166 r Number of times the Upper Trim was done
13.9 U8B_ARRAY_3[9] RESERVED 166 r Reserved
13.10 U8B_ARRAY_3[10] MODE_CHANGE_COUNT 166 r Number of times the Mode was done
13.11 U8B_ARRAY_3[11] CHARAC_TRIM_CHANGE_COUNT 166 r Number of times the Characterization Trim was done
13.12 U8B_ARRAY_3[12] LOCAL_ADJUST_CHANGE_COUNT 166 r Number of times the Local Adjust was done
13.13 U8B_ARRAY_3[13] WRITE_PROTECTION_CHANGE_COUNT 166 r Number of times the Write Protection was done
13.14 U8B_ARRAY_3[14] MULTIDROP_CHANGE_COUNT 166 r Number of times the Multidrop was done
13.15 U8B_ARRAY_3[15] PASSWORD_LEVEL_CHANGE_COUNT 166 r Number of times the Password Level was done
13.16 U8B_ARRAY_3[16] TOTALIZATION_CHANGE_COUNT 166 r Number of times the Totalization was done
13.17 U8B_ARRAY_3[17] COMMUNIC_PROTECT_MODE 169 w/r Communication Write Protection mode
13.18 U8B_ARRAY_3[18] LOCAL_ADJUST_JUMP 170 r Local Adjust Jump
13.19
U8B_ARRAY_3[19] LOCAL_ADJUST_SOFTWARE 170 r Local Adjust Software
13.20 U8B_ARRAY_3[20] LOCAL_ADJUST 170 r Local Adjust
14.1 U8B_ARRAY_4[1] JUMPER_SWITCH 170 r Jumper Switch
14.2 U8B_ARRAY_4[2] PV_ALARM_SELECT 203 w/r Primary Variable Alarm Selection
14.3 U8B_ARRAY_4[3] USER_UNIT 176,177 w/r User Unit
14.4 U8B_ARRAY_4[4] USER_UNIT_MODE 178,180 w/r User Unit Mode
14.5
U8B_ARRAY_4[5] TOTALIZER_MODE 183,185 w/r Totalizer Mode
14.6 U8B_ARRAY_4[6] TOTAL_UNIT 185,189,190 w/r Total Unit
14.7 U8B_ARRAY_4[7] EXE_PV_UPPER_RANGE_VALUE 36 w Set Primary Variable Upper Range Value
14.8 U8B_ARRAY_4[8] EXE_PV_LOWER_RANGE_VALUE 37 w Set Primary Variable Lower Range Value
14.9 U8B_ARRAY_4[9] EXE_EEPROM_CONTROL 39 w Eeprom Control
14.10
U8B_ARRAY_4[10] EXE_PV_ZERO 43 w Set Primary Variable Zero
14.11
U8B_ARRAY_4[11] EXE_RESET_TOTALIZER 184 w Reset Totalizer