SMAR HI302, User Manual

Page: 75 / 92

Appendix A
A.11
Index Parameter Data Type Valid Range / Options Default Value Units Store / Mode Description
parameters
55 CMD_44 OctString(104)
Request and Response
parameters
0 NA S See HART Command configuration parameters.
56
CMD_45 OctString(104)
Request and Response
parameters
0 NA S See HART Command configuration parameters.
57 CMD_46 OctString(104)
Request and Response
parameters
0 NA S See HART Command configuration parameters.
58 CMD_47 OctString(104)
Request and Response
parameters
0 NA S See HART Command configuration parameters.
59 CMD_48 OctString(104)
Request and Response
parameters
0 NA S See HART Command configuration parameters.
60 CMD_49 OctString(104)
Request and Response
parameters
0 NA S See HART Command configuration parameters.
61 UPDATE_EVT DS-73 NA D This alert is generated by any change to the static data.
62 BLK_ALM DS-72 NA D
The block alarm is used for all configuration, hardware, connection failure or
system problems in the block. The cause of the alert is entered in the
subcode field. The first alert to become active will set the Active status in
the Status attribute. As soon as the Unreported status is cleared by the alert
reporting task, another block alert may be reported without clearing the
Active status, if the subcode has changed.