SMAR HI302, User Manual

Page: 21 / 92

Chapter 3
3.1
Basic Configuration
Instructions on HI302 Configuration
The minimum configuration to be applied in the Syscon consists of:
•
1 RESOURCE block;
•
1 HCFG block;
•
1HIRT block for each HART device;
•
Just one HVT block, if necessary to use specific commands or a complete set of
“Common Practice” commands. This block is shared with all the devices installed.
•
1 HCD block and 1 HWPC block for each specific configuration (that is) not stored in
the FLASH memory. The configuration for Smar devices is embedded in the FLASH
memory. See the Appendix for more details.
The maximum block limit and its quantity in the factory configuration are shown below:
BLOCK MAXIMUM FCT INIT
RS 1 1
DIAG 1 1
MAO/MAI 1* 1*
HCFG 1 1
HIRT 32 8
HVT 1 1
HCD 4 0
HWPC 4 0
* Except for the HI302-N = 0