SMAR HI302, User Manual

Page: 84 / 92

HI302 – User’s Manual
C.6
HVT ALLOCATION MAP FOR SMAR LD301 V6.01
Index Parameter Name HART Variable Name HART Command Description
11.1 U8B_ARRAY_1[1] FLANGE_TYPE 128,129 w/r Flange Type
11.2 U8B_ARRAY_1[2] FLANGE_MATERIAL 128,129 w/r Flange Material
11.3 U8B_ARRAY_1[3] O_RING 128,129 w/r O_Ring
11.4
U8B_ARRAY_1[4] METER_INSTALLATION 128,129 w/r Meter Installation
11.5
U8B_ARRAY_1[5] DRAIN_VENT_MATERIAL 128,129 w/r Drain Vent Material
11.6 U8B_ARRAY_1[6] REMOTE_SEAL_TYPE 128,129 w/r Remote Seal Type
11.7 U8B_ARRAY_1[7] REMOTE_SEAL_FILL_FLUID 128,129 w/r Remote Seal Fill Fluid
11.8 U8B_ARRAY_1[8] REMOTE_SEAL_ISO_DIA_MATERIAL 128,129 w/r Remote Seal Isolating Diaphragm Material
11.9 U8B_ARRAY_1[9] NUMBER_REMOTE_SEAL 128,129 w/r Number of Remote Seals
11.10 U8B_ARRAY_1[10] SENSOR_FILL_FLUID 128,129 w/r Sensor Fill Fluid
11.11 U8B_ARRAY_1[11] SENSOR_ISO_DIA_MATERIAL 128,129 w/r Sensor Isolating Diaphragm Material
11.12 U8B_ARRAY_1[12] SENSOR_TYPE 128 r Sensor Type
11.13 U8B_ARRAY_1[13] SENSOR_RANGE 128 r Sensor Range
11.14 U8B_ARRAY_1[14] SENSOR_RANGE_UNIT 128 r Sensor Range Unit
11.15 U8B_ARRAY_1[15] SPECIAL_TRANSFER_FUNCTION 128 r Special Transfer Function
11.16
U8B_ARRAY_1[16] LOCAL_KEYS_MODE 128 r Local Keys Mode
11.17 U8B_ARRAY_1[17] TRIM_UNIT 130 r Trim Unit
11.19 U8B_ARRAY_1[19] TABLE_NUMBER_POINTS 133,135 w/r Number of points in the table
12.1 U8B_ARRAY_2[1] CONTROLLER_TYPE 136 r LD301 Controller Type Code is 23
12.2 U8B_ARRAY_2[2] POWER_UP_MODE 136,137 w/r Indicates if LD301 Power Up (Automatic, Last PID Mode Selected, Manual)
12.3 U8B_ARRAY_2[3] CONTROLLER_ACTION 136,137 w/r Indicates if Controller Action is Reverse or Direct
12.4
U8B_ARRAY_2[4] CONTROLLER_MODE 138,139 w/r Indicates if LD301 mode operation is local or remote
12.5 U8B_ARRAY_2[5] PROCESS_VARIABLE_UNIT 193 r PV unit
12.6 U8B_ARRAY_2[6] SET_POINT_UNIT 146,193,194,151 r SP unit
12.7 U8B_ARRAY_2[7] MANIPULATED_VARIABLE_UNIT 147,193 r MV unit
12.8 U8B_ARRAY_2[8] SET_POINT_TRACKING 140,141,193 w/r Indicates if Set Point Tracking is on or off
12.9
U8B_ARRAY_2[9] PID_MODE 140,141,193 w/r Indicates if Pid Mode is Automatic or Manual
12.10 U8B_ARRAY_2[10] ERROR_UNIT 140,193 r Error Unit
12.11 U8B_ARRAY_2[11] POWER_UP_SETPOINT_UNIT 151 r Power Up Set Point Unit
12.13 U8B_ARRAY_2[13] READ_SENSOR 153 w Read from sensor
12.14 U8B_ARRAY_2[14] CUTOFF_MODE 156,191 w/r Cutoff Mode
12.16 U8B_ARRAY_2[16] CHARACT_MODE 160 r Indicates if the characterization curve is enabled or disable
12.17
U8B_ARRAY_2[17] NUMBER_CHARACT_POINT 160,161 w/r Number of Characterization Points