Slate RAVEN MTi User Manual Download Page 14

Page: 14 / 129

RAVEN MTi

Maintenance and Care

Your RAVEN MTi is now back to its original slickness!

Getting Started

System Requirements

The RAVEN MTi will run on any Mac computer, however we recommend
these specifications for optimal performance.

•

OSX 10.7 (Lion,) OSX 10.8 (Mountain Lion,) and OSX 10.9 (Mavericks)

•

Intel i7 or Xeon processor with a clock speed of at least 2.4 GHz.

•

Minimum 2GB RAM (We recommend 4GB for strong performance.)

•

Graphics card with minimum 512MB memory, though 1GB graphics
memory is recommended.

•

Any Mac Pro produced after 2010 is ideal and will meet all the
requirements, though Mac Mini’s and iMac’s meeting the requirements

should do fine. Graphic response speed will vary depending on the
capabilities of the computer’s graphics card.

Summary of Contents for RAVEN MTi


































































































































Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands

Slate RAVEN MTi, User Manual

Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands