Slate RAVEN MTi User Manual Download Page 111

Page: 111 / 129

111

RAVEN MTi

Logic

13.

Banking Buttons:

Users may choose to bank tracks by 1 or 24 tracks. To switch between

the two modes, simply press and hold the banking buttons and they will
switch between 24 and 1.

NOTE:

Users may feel they’ve reached the end of their project but are missing
tracks. This is not the case. RAVEN will only recognize full sets of 24
Tracks. If there are remaining tracks after the user has reached the last

set of 24 tracks, the user should then switch to single track banking to
reach the last tracks on the Raven Mixer.

14.

Serial MacroKeys (“HotKeys”)

Create your own HotKeys using standard keyboard commands. To create
a HotKey:

•

Press and hold any of the HotKey buttons labeled 1-6 or 1-8.

Summary of Contents for RAVEN MTi


































































































































Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands

Slate RAVEN MTi, User Manual

Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands