Slate RAVEN MTi User Manual Download Page 73

Page: 73 / 129

RAVEN MTi

Pro Tools

Press

Track Lane Top

to change selected tracks back to waveform view. If

already in waveform view this function will toggle between volume and
waveform.

Track Lane Up:

Press

Track Lane Up

to toggle the track Lane up one lane. (To be used with

Track Lane Down and Track Lane Top)

Track Lane Down:

Press

Track Lane Down

to toggle the track lane down one lane. (To be used

with Track Lane Up and Track Lane Top)

MOVE TAKE TO TOP:

Press

MOVE TAKE To Top

to move selected take to the main playlist.

MOVE CURSR UP

Press

MOVE CURSR UP

to move the track selection up to the next available

track.

MOVE CURSR DOWN

Press

MOVE CURSR DOWN

to move the track selection down to the next

available track.

Layout 1.3 “View & Track Status” Batch Commands:

FIT ALL:

Press

FIT ALL

fit all available tracks vertically and horizontally into the edit

window.

Summary of Contents for RAVEN MTi


































































































































Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands

Slate RAVEN MTi, User Manual

Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands