Slate RAVEN MTi User Manual Download Page 58

Page: 58 / 129

RAVEN MTi

Pro Tools

•

Like the RAVEN Mixer, the floating mixer can also be banked using
finger swipes. Touch the fader faceplate and glide your one finger

left and/or right to bank by one track at a time. Do not touch the
fader cap for a banking motion.

•

Users can also bank more quickly by using two-fingers on the
faceplate of the fader tracks and swipe left or right to bank by eight
tracks at a time.

RAVEN Settings

Touch the Settings button and the tool racks will appear. At the very top you’ll
notice a RAVEN Settings toolbar.

There are eleven buttons on the RAVEN Settings bar.

Save As:

Brings up the dialog window for renaming and saving the RAVEN
session to a location.

Load RAVEN Session:

Summary of Contents for RAVEN MTi


































































































































Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands

Slate RAVEN MTi, User Manual

Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands