Slate RAVEN MTi User Manual Download Page 74

Page: 74 / 129

RAVEN MTi

Pro Tools

REC ENABLE (Record Enable Tracks):

Press

Record Enable Tracks

toggle record status for all selected tracks.

FIT TRACK WINDO (Window):

Press

FIT TRACK WINDO

to fit all selected tracks vertically into the edit

window.

ZOOM EDIT SELECT:

Press

ZOOM EDIT SELECT

to zoom to selected track and toggle between a far

and tight view of the selection.

SOLO TRACK:

Press

SOLO TRACK

to toggle the solo status for all selected tracks.

MUTE TRACK:

Press

MUTE Track

to toggle the mute status for all selected tracks.

RAVEN MTX/MTi PT10/11 HD Layout 2 of 8 For Music

Layout 2.1 “Editing” Batch Commands:

AUDIO SUITE PREVIEW:

Press

Audio Suite Preview

to send a mouse click to the preview button on an

open AudioSuite plugin.

Summary of Contents for RAVEN MTi


































































































































Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands

Slate RAVEN MTi, User Manual

Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands