Slate RAVEN MTi User Manual Download Page 30

Page: 30 / 129

RAVEN MTi

Pro Tools

Under "View" on the Pro Tools OS Menu Bar, navigate to "Mix Window

Views"

Select 1 set of inserts and 1 set of sends.

Confirm you have your group and track lists displayed on the left of the
Pro Tools Mixer as well as confirm your clip lists are completely hidden

on the right of the Pro Tools Mixer.

Launch the RAVEN MTi Software from the dock.

Notice the

red vertical line

on the left side of the RAVEN Mixer.

10.

Again, make sure your track list is showing,

and your Pro Tools

mixer tracks are scrolled fully to the left.

Then use the mouse to grab the

right side of the track list. The shadow displayed when the track/group

lists are being resized fits perfectly inside of the provided

vertical red

line.

Summary of Contents for RAVEN MTi


































































































































Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands

Slate RAVEN MTi, User Manual

Search results

Summary of Contents for RAVEN MTi

Reviews:

Related manuals for RAVEN MTi

Brands by name

Popular brands