Slant/Fin VHG-100-CH, Installation And Service Manual

Page: 91 / 164

E93.1901EN032 Installation and Service Manual SlantFin VGH-CH / CO
91
S
ET
A
CTUAL SETPOINT
/DHW
SETPOINT DIRECTLY VIA THE
S
TATUS OVERVIEW
When CH is active, you can adjust the Actual setpoint directly on the bottom of the Status overview. When DHW
is active, you can adjust the DHW setpoint directly on the bottom of the Status overview.
This means that when CH is active, you cannot set the DHW setpoint directly via the Status overview. When DHW
is active, you also cannot set the Actual setpoint (CH setpoint) directly via the Status overview.
Press UP/DOWN
↑↓
to select the mode, then press ENTER or RIGHT
→
to confirm the mode and the
Actual/DHW setpoint becomes directly settable. Use UP
↑
or DOWN
↓
to increase/decrease the setpoint.
Press ENTER or RIGHT
→
to confirm your alteration or press ESC or LEFT
←
to cancel.
A setpoint is only visible on the display when no error or alert is active. In case of an active error or alert, the bottom
right part of the display is used to display the error or alert text.
E
NTERING THE MENU
Enter the menu by pressing the MENU button once. The header in the display shows you are inside the main
menu. While scrolling through the menu you will see that the selected menu item is shown in a white rectangle.
Enter a menu item by pressing ENTER or RIGHT
→
.
The header shows your location inside the menu, as seen in the following image:
If you are inside the menu (or a menu item) and want to return directly to the Status overview press
MENU or ESC If you want to go back one step in the menu press BACK/LEFT
←
.
If CH-mode is set to:
CH mode 1 – CH with an outdoor temperature reset and thermostat control
or
CH mode 2 – Central Heating with full outdoor temperature reset
The following display will appear:
Enter a menu item by pressing ENTER or RIGHT
→
The header shows your location inside the menu, as seen in the following image:
It now is possible to set the Outdoor reset curve by changing the parameters on the righthand of the screen.
If you are inside the menu (or a menu item) and want to return directly to the Status overview press
MENU or ESC If you want to go back one step in the menu press BACK/LEFT
←
.
Figure 11.8
Figure 11.9
Figure 11.10
Figure 11.11
Central Heating (CH)
Domestic Hot Water (DHW)
Information
Settings
▼
170 °F
Outdoor Reset
Central Heating (CH)
Outdoor Reset
Central Heating (CH)