IDP 800 Terminal Series - Hardware Guide
T209, Version 01 82 © SkyWave Proprietary
Figure 67 Silicone in the Connector
10.
Slide the back shell up the cable as close as possible to the connector body and fill it
with silicone sealant (Figure 68).
Figure 68 Silicone in the Grommet
11.
Assemble the back shell to the connector body and wipe away any excess sealant.
12.
Apply sealant over the cable exit area as shown in Figure 69.
Figure 69 Cable Exit Area
13.
Assemble the sealing nut over the back shell until the cable grip makes full contact
with the perimeter of the cable jacket (Figure 70). Wipe away any excess sealant.
Summary of Contents for IDP 800 Series
Page 102: ...www SkyWave com ...