SKY Agriculture Methys FT, Original Instructions Manual

Page: 155 / 173

J S
EED CONTROLLER
The seed controller’s main ECU, which is placed under the distribution head, is equipped with two status LEDs.
Red LED
LED status Information Check
Quick fl ashing No communication with the fl ow sensors. Check the connections.
OFF Normal operation
always on No CAN communication. Check the connections.
Green LED
LED status Information Check
Slow fl ashing Normal operation
OFF No power supply voltage Check that the machine is under voltage.
always on Software updating Check that the update was successful.
Red LED
LED status Information Check
OFF Normal operation
always on Sensor dirty or obstructed.
Check if the sensor is obstructed
or dirty and clean it.
Quick fl ashing No communication with the ECU Check the connections.
Slow fl ashing Sensor in confi guration or acquisition mode.
Green LED
LED status Information Check
Slow fl ashing Normal operation, without product passage.
Quick fl ashing Normal operation, with product passage detection.
OFF (with red LED OFF) No power supply voltage Check the connections.
OFF (with red LED ON) Sensor dirty. Clean the blocking sensor No. X
always on Software updating
The operation of the seed controller is only guaranteed with wheat.
155
EN
7
Equipements / Accessories / Ausrüstungen