55
SKOPE VF Series
Replacement Procedures
Service Manual
To replace the sign light
1. Disconnect the cabinet from the mains power supply.
2. Remove the sign assembly. Lift the assembly up and off the sign sides and
unplug it from the cabinet (see page 53).
3. Seperate the sign light
assembly from the sign
panel by undoing the two
fixing screws on each side
of the sign panel, the 2
fixing screws on top and
the 3 in the bottom
(access via vent holes).
4. Remove the top of the
sign light assembly by
undoing the fixing screws
on the top of the sign light
assembly.
5. Remove the plastic sign panel (and artwork if present) from the sign light
assembly.
6. Rotate and remove the
failed LED tube.
7. Fit the new LED tube.
8. Refit the clear front panel (and artwork if present) and screw the sign top
cover back onto the top of the sign assembly.
9. Refit and fix the sign light assembly back onto the sign panel assembly.
10. Plug the sign assembly back into the cabinet and slot the assembly back
onto the sign sides.
