54
Replacement Procedures
Service Manual
SKOPE VF Series
Lighting
The cabinet is designed for use with LED tubes and is not compatible with
fluorescent tubes. As with any maintenance, ensure the cabinet is
disconnected from the power supply before replacing light tubes.
The lighting is controlled by the electronic controller and can be switched on
and off via the
AUX
button on the controller display (see page 11).
Interior Light
Solid door cabinet interior lights switch on and off as the door is opened and
closed, and glass door cabinet interior lights stay on or off regardless of door
openings and closings.
The cabinet interior is lit by side or centre pillar lights (see table below for
details), which can be replaced without moving shelves or removing product.
Interior light specifications
To replace the cabinet interior light
Sign Light
Not as standard - lit sign cabinets only. The sign unit is lit by one LED tube
(see table below for details) which can be replaced by removing the front
sign panel.
Sign light specifications
IMPORTANT
DO NOT use fluorescent tubes.
Model
LED Tube Specification
VF650
1 x side light: 22 Watt T8 LED tube (Ø26mm x 1500mm)
VF1000/1300
1 x pillar light: Twin 24 Watt T8 LED tube (Ø26mm x 1500mm)
VF1500
2 x pillar lights: Twin 24 Watt T8 LED tube (Ø26mm x 1500mm)
1. Disconnect the cabinet from the power supply.
2. Remove the diffuser by squeezing it until it is released from the aluminium
housing, and then push the diffuser out of the way.
3. Rotate the LED tube until the pins on the ends of the tube align with the slots,
then slide it out.
4. Fit a new LED tube. Ensure the LED tube is fitted with the power end at the
top.
5. Refit the diffuser by slipping the back section into the housing, then
squeezing and snapping the front section of the diffuser into place as you
work down the length of the light.
Model
LED Tube Specification
VF650
1 x 9 Watt T8 Frosted LED tube (Ø26 x 600mm)
VF1000
1 x 12 Watt T8 Frosted LED tube (Ø26 x 900mm)
VF1300
1 x 20 Watt T8 Frosted LED tube (Ø26 x 1200mm)
VF1500
1 x 22 Watt T8 Frosted LED tube (Ø26 x 1500mm)
