41
SKOPE ReFlex Chef Base Fridge
Replacement Procedures
Service Manual
Control Probe
The control probe is clipped to the inside of the evaporator assembly.
To replace the control probe
1. Gain access to the evaporator fan assembly (see steps 2-3, “To access and
replace the evaporator fan assembly” on page 36).
2. Take note of cable routing (photo recommended), then carefully cut cable
ties to release the probe cable. Detach the probe from the evaporator
assembly, trace back to its connector and unplug.
3. Replace the probe. Following the same path as the original probe, fit the
new probe with cable ties as necessary. Ensure the probe cable is securely
connected and cable tied in place.
4. Reassemble and test for correct operation.
