39
SKOPE ReFlex Chef Base Fridge
Replacement Procedures
Service Manual
Electronic Controller
The electronic controller and electrics panel is matched to the cabinet, and
must be left with the cabinet when servicing the refrigeration unit. Only
specific components can be replaced in the unit.
Different controller parameter sets are used across different models. Ensure
the controller is set-up with the correct parameter set for the cabinet model.
Controller
Location
The electronic controller is located on the electrics panel at the front of the
refrigeration cartridge.
To access and remove the controller
QC Terminals
The terminals at the back of the controller are locking QC terminals, which
cannot be pulled off without pressing in the locking tabs.
Use needle nose pliers to unlock and gently remove the terminals.
1. Unplug the cabinet from the power supply.
2. Remove the unit cover from the cabinet.
3. To remove the controller: Press and hold the tabs on each side of the
electronic controller to unlock, and push the controller through the front of
the controller box. Unplug the electronic controller from the cartridge.
