35
SKOPE ReFlex Chef Base Fridge
Replacement Procedures
Service Manual
To replace the fan blade
To replace the fan motor (with correct SKOPE spare part only)
1. Remove the condenser fan assembly (see above).
2. Remove the screw and washer from the centre of the fan blade, and lift the
blade from the motor.
3. Replace new blade and fix with 12mm flat washer and serrated head screw.
Tighten the blade to recommended torque setting.
4. Refit the condenser fan assembly to the cartridge. Following the same path
as the original probe, secure the condenser fan motor cable with cable ties
as necessary.
5. Reassemble and test.
1. Remove the condenser fan assembly and the fan blade (as above).
2. Detach the fan motor from the fan mounting brackets by removing the four
screws from the mounting bracket.
3. Fit new motor and reattach fan blade with 12mm flat washer and serrated
head screw. Tighten the blade to recommended torque setting.
4. Refit the condenser fan assembly to the cartridge. Following the same path
as the original cable, secure the condenser fan motor cable with cable ties
as necessary.
5. Reassemble and test.
