37
SKOPE BackBar X
Installation
Service Manual
Positioning the Cabinet
Legs and
Castors
The chiller is packed with a set of adjustable height legs and a set of
adjustable height castors. The legs can adjust the cabinet height up to
30mm, and the castors can adjust the cabinet height up to 15mm.
Depending on specific height and manoeuvrability requirements, either of
these sets can be screwed into the mounting plates on the bottom of the
cabinet.
Note:
If fitting the castors, the lockable castors should be fitted to the front
of the cabinet, and the non-locking castors fitted to the rear.
To adjust leg height
To adjust castor height
1. Turn the black plastic foot
at the bottom of the leg
counter-clockwise to raise
the height or clockwise to
lower.
1. Rotate the lock nut anti-
clockwise to free-up the
castor for height
adjustment.
2. Turn the castor counter-
clockwise to raise the
height or clockwise to
lower (see image below).
Re-tighten each lock nut
after final adjustment has
been made.
3. After final adjustment has been made, rotate the lock nut clockwise to lock
the castor height.
Castor
mounting plate
Adjustable leg
Plastic foot
Lock nut
