41
SKOPE BackBar X
Replacement Procedures
Service Manual
Lighting
This chiller is designed for use with LED tube lights and is not compatible
with fluorescent tubes.
The chiller is fitted with one T8 LED tube light, which can be replaced without
moving shelves or product. See the table below for light tube specifications.
Note:
LED light tubes may be fitted with rotating end caps at each end of the
tube. Ensure both end caps are positioned at the ‘8’ setting and that the light
faces in the correct direction.
To replace the interior LED light tube
IMPORTANT
DO NOT
use fluorescent tubes.
Model
Light description
SKOPE Part No.
BB380X 1 x 20W T8 frosted LED tube (Ø26 × 900mm, 5500K) ELL10742
BB580X 1 x 24W T8 frosted LED tube (Ø26 × 1500mm, 5500K) ELL10743
BB780X 1 x 24W T8 frosted LED tube (Ø26 × 1500mm, 5500K) ELL10743
1. Disconnect the cabinet from the power supply.
2. Remove the top light
diffuser by squeezing it
until it is released from the
housing.
3. Rotate the LED tube until
the pins on the ends of the
tube align with the slots,
then slide it out.
4. Fit a new LED tube and
clip the diffuser back into
place. When fitting
vertically mounted LED
tubes, ensure the tube is
fitted with the ‘Power’ end
at the top.
