Ski-Doo Skandic Series 2016, Operator'S Manual

Page: 131 / 163

MONITORING SYSTEM
NOTE: Some of the listed pilot lamps do not apply to all models.
PILOT
LAMP(S)
ON
BEEPER DESCRIPTION
Engine is overheating, reduce snowmobile speed and run
in loose snow or stop engine immediately and let engine
cool down. Check coolant level, refer to
MAINTENANCE . If
coolant level is correct and overheating persists, contact an
authorized Ski-Doo dealer, repair shop, or person of your own
choosing. Do not run the engine if condition persists.
4 short
beeps
every 30
seconds
Reduce speed or stop engine. Let engine cool down and
restart. If overheating persists, contact an authorized Ski-Doo
dealer, repair shop, or person of your own choosing. Do not
run the engine if condition persists.
Critical overheat. Stop engine immediately and let engine cool
down. Check coolant level, refer to
MAINTENANCE
. If coolant
level is correct and overheating persists, contact an authorized
Ski-Doo dealer, repair shop, or person of your own choosing.
Do not run the engine if condition persists.
Short
beeps
repeating
rapidly
Critical overheat. Stop engine immediately and let engine
cool down. If overheating persists, contact an authorized
Ski-Doo dealer, repair shop, or person of your own choosing.
Do not run the engine if condition persists. Do not run the
engine if condition persists.
4 short
beeps
every
5
minutes
Indicate a low or high battery voltage condition. See an
authorized Ski-Doo dealer as soon as possible.
4 short
beeps
Engine fault, see an authorized Ski-Doo dealer, repair shop, or
person of your own choosing as soon as possible.
—
4 short
beeps
every
5
minutes
Engine detonation (RPM is limited when this condition
occurs).
– Ensure recommended fuel is used.
– Check fuel quality, replace if necessary.
– If fault still occurs, contact an authorized Ski-Doo dealer,
repair shop, or person of your own choosing.
—
4 short
beeps
every
5
minutes
Engine RPM limited for protection when certain faults occur.
______________
129